ZM2100 Alcohol detector

Name: ZM2100 Alcohol detector
SKU: ZM2100
Rating: 4.8 (5 reviews)

ZM2100

Detection mode: pump suction
Type of sensor: electrochemical fuel cell type alcohol sensor
Detection gas: alcohol Blowing distance:<5cm
Detection time: 3-15s adjustable
Work environment: temperature-10-50 °C;humidity: 20-98% RH
Response time:<2S Indication error:<±5mg/100ml
Indication method: LED, sound, vibration indication alarm
Baton mode: indicator light always on/flashingOperating
Voltage: DC3.7V lithium rechargeable battery; 2000mAh
Power saving mode: when the detector is in standby mode and not in command mode, it will shut down automatically for 3 minutes
Charging time:<6H
Standby time: no less than 8 hours (non alarm state)
Life of sensor: 2 years (electrochemical)
Overall dimension: 383mm x 66mm x 47mm
Weight: About 3000g Shell material: engineering plastics

Enquiry

This portable alcohol detector, which combines alcohol detection with baton instrument, is mainly used for rapid alcohol detection. The
alcohol detector uses pump suction method to detect, which makes the detection more rapid and accurate.
The instrument adopts electrochemical fuel cell type alcohol sensor, which has excellent sensitivity and excellent repeatability; it adopts embedded microcomputer control, which is easy to operate; the detector shell is made of high-strength engineering plastic, with high strength and good handle.
The design, manufacture and verification of this product comply with the following national standards:
GB 19522-2010 《threshold and test of alcohol content in blood andbreath of vehicle drivers》
GB/T21254-2017 《exhaledgas alcohol content detector》

Parameters

Detection mode	Pump suction
Type of sensor	Electrochemical fuel cell type alcohol sensor
Detection gas	Alcohol
Blowing distance	<5cm
Detection time	3-15s adjustable
Work environment	Temperature-10-50 °C;humidity: 20-98% RH
Response time	<2S
Indication error	<±5mg/100ml
Indication method	LED, sound, vibration indication alarm
Baton mode	Indicator light always on/flashing
Operating voltage	DC3.7V lithium rechargeable battery; 2000mAh
Power saving mode	When the detector is in standby mode and not in command mode, it will shut down automatically for 3 minutes
Charging time	<6H
Standby time	No less than 8 hours (non alarm state)
Life of sensor	2 years (electrochemical)
Overall dimension	383mm x 66mm x 47mm
Weight	About 3000g
Shell material	Engineering plastics