KP830 portable single gas detector (intrinsic safety design) can make continuous detection to combustible or toxic gases. It is suitable for using in
underground pipe or mines, to keep the workers safe, prevent the facilities from being destroyed.
The detector adopts excellent-quality gas sensor, makes detection in natural diffusion way. It has good sensitivity and reproducibility. The detector adopts embedded MCU controller, easy to operate.
The shell adopts special high strength material and anti-slip rubber, with the characters of water-proof and dust-proof.
Features
- Advanced MCU control with low power consumption;
- Large LCD display
- Adjustable low and high alarm level
- Adjustable calibrating level
- High concentration protection for combustible gas
- Self test for combustible gas sensor
- Low battery indication
- Real time clock display
- Replaceable sensor module
- Self-adjustment function
- Visual and audible alarm with vibration;
- Data storage and uploading;
- STEL and TWA alarming for toxic gases
- Advanced self-examination and self-repair function
- Password management to avoid wrong operation
- Intrinsic safety design.
Parameters
|
Target Gas
|
combustible gas (CH4,C3H8,H2) , toxic gas, oxygen, Other rare toxic gas like ammonia , NO, PH3, NH3, NO2,HCN, SO2 etc
|
|
Accuracy
|
≤±5% F.S.
|
|
Response time
|
T<30s
|
|
Indication
|
LCD indicates the time and state
|
|
Operating temperature
|
40℃～70℃ (for combustible gas)
|
|
Operating temperature
|
-20℃～50℃ (for toxic gas)
|
|
Humidity
|
<95%RH non-condensing
|
|
Operating voltage
|
DC3.7V Li-ion battery 1800mAh
|
|
Working time
|
Combustible gas: ≥ 8h continuously; Toxic gas: ≥300h
continuously
|
|
Charging time
|
4h～6h
|
|
Sensor life
|
2 years
|
|
Protection level
|
IP65
|
|
Weight
|
About 130g
|
|
Dimension
|
100.0mm×58.0mm×30.0mm
|
